0 Cart
Added to Cart
      You have items in your cart
      You have 1 item in your cart
        Total

        how to measure your horse for a double show bridle

        Before You Measure A Horse for a 2 in 1 Double Bridle:

        • You will need a flexible measuring tape
        • Make sure your bridle is done up on the correct holes with the bits you will be using. Bits can radically change the size of bridle you require
        • Measure your already assembled bridle - no need to disassemble and make flat

        Measuring A Horse for a 2 in 1 Double Bridle:

        1. Take your measuring tape and measure your bradoon bit (snaffle) from end to end. Start at the corner of the bit where the leather attaches. Take the tape over the crown to the bit on the other side. Do not include the ring in the measurement, only your bridle.
        2. Now take the tape and do the same for the bit (curb). Measure the top of the bit over the crown to the top of the bit on the other side.
          Please note: We recommend as a general rule to purchase a bradoon cheekpieces one size smaller than your curb as the bradoon bits sits higher in the mouth. However, confirm your sizes from your measurements.
        3. Measure the browband from end to end
        4. Measure the circumference of the noseband. Do it up on the hole it is normally done up on. Start at the buckle and measure on the outside of the noseband around the circumference back to the buckle.

        Please note: All of our measurements are on the middle holes. Please add your measurements to notes on checkout if you are unsure and we can match your measurements or will contact you if there are any queries.

        We recommend you watch the how to measure your double bridle youtube tutorial. See below for a link.

        Please email us with any questions on sales@ffequestrian.com

         

        FOR OUR INTERNATIONAL CUSTOMERS 
        HERE IS A SIZE COMPARISON FOR YOUR LOCAL SIZING

        Please note this is an approximation and please use our size chart to get our exact sizing. 

        International Size Conversion for Horse Snaffle Bridle

         

        BRADOON HANGER MEASUREMENT

        2 in 1 bridle bradoon hanger size measurement chart

        BIT TO BIT MEASUREMENT

        MEASUREMENTS ARE TAKEN WITH THE CHEEK PIECES MOUNTED ON THE MIDDLE HOLE OF THE HEADPIECE STRAPS

        2 in 1 bridle headpiece to cheekpiece measurement

        BROWBAND MEASUREMENT

        MEASUREMENTS ARE TAKEN FROM END TO END OF THE BROWBAND

        2 in 1 double bridle browbands size measurement chart

        NOSEBAND MEASUREMENT

        MEASURE THE CIRCUMFERENCE OF THE NOSEBAND, STARTING AND ENDING WITH THE BUCKLE

        noseband 2 in 1 double bridle size measurement

        NOSEBAND WIDTH MEASUREMENT

         double bridle noseband width measurement size chart

        HEADPIECES MEASUREMENT

         double bridle parts headpiece measurement double bridle parts headpiece measurement size chart

         

        CHEEKPIECES MEASUREMENT

        double bridle cheekpiece size measurement chart

        REINS MEASUREMENT

         Measure the length of a single rein from the end of the bit loop to the buckle.

        Please note that the bit loop should be done up as though attached to a bit ring.

        double bridle parts reins measurement size chart

         

        Net Orders Checkout

        Item Price Qty Total
        Subtotal $0.00
        Shipping
        Total

        Shipping Address

        Shipping Methods